*NEW* RPM UPGRADE PACKAGE FOR ARRMA 6S Outcast Kraton Notorious (BLACK)

Description

This will work on the Current 6S V4 Kraton, Outcast, Notorious, Talion
This Package Includes:
QTY 2 - Front Arm Sets RPM81482
QTY 1 - Rear Arm Set  RPM81402
QTY 1 - Rear Skid Plate  RPM81442
QTY 1 - Wing Mounts  RPM81642
QTY 1 - Mud Deflectors  RPM81412
Quick Notes:
– also fits the Durango DEX8T
– roughly 10% lighter than stock
– less slop for more accurate suspension settings
– replaces stock ARRMA #AR330218 & #AR330219
– replaces stock Durango #TD330709 & #TD330710
Description
RPM
A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed primary for strength and durability but we’ve added a few extra features in as well. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the inner mounts, providing for better steering response and more consistent camber, caster and toe angle settings. Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up, allowing the shocks to lay down a little further, dropping the ride height for a lower center of gravity. As an added bonus, our front A-arms are roughly 10% lighter than stock (59.5g –
RPM
versus 66g stock)!
RPM
A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All
RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when the conditions are at their worst!
Tech Notes:
RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold as one upper and one lower in each package. Two packages are needed for each vehicle. Our A-arms replace stock ARRMA #AR330218 & #AR330219 and also replaces stock Durango #TD330709 & #TD330710.
Quick Notes:
– also fits the Durango DEX8T
– roughly 10% lighter than stock
– less slop for more accurate suspension settings
– optional
Mud Guards
also available
– replaces stock ARRMA #AR330249
– replaces stock Durango #TD330707
Description
RPM
Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. First is slop elimination. Our A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.
Our next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on our front A-arms (
RPM
#81482 – sold separately).
Another beneficial improvement comes from reduced weight.
RPM
Kraton, Talion & Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)!
RPM
rear A-arms have molded in mounting points for our optional mudguards –
RPM #81412
(sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.
Our A-arms are designed with leading and trailing 30° chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All
RPM
A-arms are molded from our nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst!
Tech Notes:
RPM
ARRMA Kraton, Talion, Outcast & Durango DEX8T A-arms are sold in pairs. Our A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use
RPM
#81412 – sold separately).